Home > Products > PolykenGTC Polypropylene Woven Tape > Cold Applied Pp Woven Tape
Cold Applied Waterproof Black Pp Woven Pipe Mechanical Protection Tape

Cold Applied Waterproof Black Pp Woven Pipe Mechanical Protection Tape

If you are looking for China golden supplier and China good supplier cold applied waterproof black pp woven pipe mechanical protection tape, good quality and high quality cold applied waterproof black pp woven pipe mechanical protection tape, please feel free to contact Jining Qiangke Pipe...

Description

If you are looking for China golden supplier and China good supplier cold applied waterproof black pp woven pipe mechanical protection tape, good quality and high quality cold applied waterproof black pp woven pipe mechanical protection tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.






System Description

The GTC Coating System/cold applied waterproof black pp woven pipe mechanical protection tape is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a tough, woven polypropylene backing with a high tack butyl rubber adhesive. An additional layer of POLYKEN 980 or 955 should also be used on pipes larger than 12" diameter to improve the soil stress resistance of the system.It is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a tough, woven polypropylene backing with a high tack butyl rubber adhesive.

It’s also used for both metallic pipelines and waterproofing works against outdoor bad weathers .Anti corrosion adhesive tape can be used extensively in metal pipes of all pipelines and facilities in petroleum, natural gas, petrochemical industry, electric power, metallurgy, urban gas pipeline network and water supply etc. For efficient and long lasting outer anti corrosion.


Uses

Waterproofing-

-Waterproofing membrane for basements,sub structures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.

-Tough, high performance waterproof membrane for critical substructures and civil engineering works.

-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.

-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt


Pipelines protection

_ Weld joints

_ Bends

_ Fittings

_ Bare pipe lengths

_ Pipe rehab and repair

_Bare pipe length

_Line travel pipelines


Structures

Backing :   a tough ,woven  polypropylene

Adhesive :  high tack butyl rubber adhesive

Interleaf: Anti-adhesive Film Treated with Silicone.


Features

_ Can be applied over a wide temperature range

_ Good conformability and consistent uniform thickness	

_ Heavy duty butyl bitumen compound adhesive ensures a strong bond & impervious seal.

_ Excellent adhesion to pipe and self

_ Flexibility provides extra protection at vulnerable areas

_ Compatible with common pipe coatings

_ Excellent resistance to cathodic disbonding


Technical Datas

PROPERPTIES

UNIT

TEST METHOD

TYPICAL VALUES

POLYKENGTC 40

POLYKENGTC 50

POLYKENGTC 60

POLYKENGTC 65

Total thickness

mil

ASTM D 1000

40mils(1.0mm)

50mils(1.27mm)

60mils(1.52mm)

65mils(1.65mm)

Tensile Strength

Kg/cm

ASTM D 1000

35

35

35

35

Peel adhesion

To primed pipe

Kg/cm

ASTM D 1000

25

28

30

34

To backing

Kg/cm

ASTM D 1000

20

25

26.5

28

Dielectric Strength

KV/mm

ASTM D 1000

20

23

26

30

Water Absorptivity

%

ASTM D 570

0.1

0.08

0.08

0.06


Ordering Information

POLYKEN GTC

Eg.: POLYKEN GTC 4"×50'

POLYKEN GTC

Product Model No.

Standard ordering options

50

Total tape thickness in mils

40mils(1.0mm),50mils(1.27mm),60mils(1.52mm),65mils(1.65mm)

4

Tape width in inches

2"(50mm),,4"(100mm),6"(150mm),

50

Tape roll length in feet

50ft(15M),100ft(30M)

Material Requirements

(Width of Coating in inches) ×(Area of pipe in square feet)*

----------------------------------------------------------------------------=Squares **of Coating 

Required

(Width of coating in inches-Overlap in inches) ×100

*Area of pipe in square feet=(Diameter in inches)/12×3.1416×(Length in feet)

**One square=One hundred square feet=9.29 square meters

(Width of Coating in mm) ×(Area of pipe in square meter)*

-------------------------------------------------------------------------------=Square meter of Coating Required

(Width of coating in mm-Overlap in mm)

*Area of pipe in square meter=(Diameter in mm)/1000×3.1416×(Length in meter)


Related Products

Feedback

We're Here to Help

  • Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd
    Add:Jiaxiang Industry Park,jining,shandong
    Contact: Mr.Jecky Li
    Mobile: +86-018266876533
    Tel: +86-537-6400111 Fex: +86-537-6400222
    Mail: famoustape@163.com

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!