Home > Products > Polyken955 Mechanical Protection Tape > Polyken Tape
Polyken Pipe Coating Tape

Polyken Pipe Coating Tape

If you are looking for China golden supplier and China good supplier polyken pipe coating tape, good quality and high quality polyken pipe coating tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd. System Description The polyken pipe coating tape /POLYKEN 955...

Description

If you are looking for China golden supplier and China good supplier polyken pipe coating tape, good quality and high quality polyken pipe coating tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.

System Description

Butyl rubber Waterproof Sealing tape is made of saturated butene rubber, butyl rubber elastic plastic rubber, halogenated butyl rubber as the main raw material. These products have excellent air tightness, water tightness, good self-adhesive, elongation, weatherability, low temperature resistance and water resistance, no solvent pollution, that is, adhesion, construction safety and convenience. Can be widely used in polymer waterproofing. Butyl rubber Waterproof Sealant adhesive tape has a strong adhesion to the surface of various materials, with excellent weathering resistance, anti-aging and waterproof, the adhesive surface to seal, damping, protection and other functions. The product is totally free of solvent, so it does not shrink, does not emit toxic gases. Because its lifetime is not curing, so the heat shrinkage and mechanical deformation of the surface has excellent adhesion, is a very advanced waterproof sealing material.


Features

-Resistant to soil stress

- Excellent adhesion to pipe and self

-Low cathodic protection

-Long-term in-ground performance

- Serve for low-high temperatures

- Cold applied

-Uniform coating thickness

-Compatible with all pipe diameters and generic plant

coating systems

-Qualified ASTM D1000,AWWA C 214,EN 12068 standards


Structure

Backing :  Special blend of stabilized polyethylene      41y.png

Adhesive : Butyl rubber and Adhesion Promoting Resins


Color   :Black or White



Properties

Product Properties

Test method

Typical Value

POLYKEN 955-15

POLYKEN 955-20

POLYKEN 955-25

POLYKEN 955-30

Total Thickness


15mil(0.381mm)

20mil(0.508mm)

25mil(0.635mm)

30mil(0.762mm)

Backing of PE film


10mils(0.254 mm)

15mil(0.381mm)

20mil(0.508mm)

25mil(0.635mm)

Butyl Rubber Adhesive


5 mils(0.127 mm)

5mil(0.127mm)

5mil(0.127mm)

5mil(0.127mm)

Tensile Strength

ASTM D1000

50N/cm

60N/cm

70 N/cm

80 N/cm

Elongation

ASTM D1000

300%

350%

350%

450%

Peel Adhesion to Primed Steel

ASTM D1000

24 N/cm

25 N/cm

26.5 N/cm

33 N/cm

Water Vapor Transmission Rate

ASTM E 96

0.10g/m2

0.10g/m2

0.08g/m2

0.06g/m2

Water absorption after 1 day,At+23℃

ASTM D570

0.10%

0.10%

0. 08%

0. 06%

Volume Resistivity

ASTM D 257

2.0 x 1015 ohm.cm

2.5 x 1015 ohm.cm

2.6 x 1015 ohm.cm

2.6 x 1015 ohm.cm

Dielectric Strength

ASTM D149

30 kv

36 kv

43 kV

45 kV

Ordering Information

POLYKEN 980 and 955 tape coatings are in roll form.

Eg.: POLYKEN 955-20  WHI  6"×400'

POLYKEN 955

Product Model No.

Standard ordering options

20

Total tape thickness in mils

15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)

WHI

Tape backing color

White (WHI)

6

Tape width in inches

2"(50mm),,4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)

400

Tape roll length in feet

100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)


(Width of Coating in inches) ×(Area of pipe in square feet)*

----------------------------------------------------------------------------=Squares **of Coating Required

(Width of coating in inches-Overlap in inches) ×100


*Area of pipe in square feet=(Diameter in inches)/12×3.1416×(Length in feet)

**One square=One hundred square feet=9.29 square meters


(Width of Coating in mm) ×(Area of pipe in square meter)*

-------------------------------------------------------------------------------=Square meter of Coating Required

(Width of coating in mm-Overlap in mm)


*Area of pipe in square meter=(Diameter in mm)/1000×3.1416×(Length in meter)

Related Products

Feedback

We're Here to Help

  • Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd
    Add:Jiaxiang Industry Park,jining,shandong
    Contact: Mr.Jecky Li
    Mobile: +86-018266876533
    Tel: +86-537-6400111 Fex: +86-537-6400222
    Mail: famoustape@163.com

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!