If you are looking for China golden supplier and China good supplier polyken polyethylene pipeline tape, good quality and high quality polyken polyethylene pipeline tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.
Polyethylene pipeline tape is my company in the traditional polyethylene anti-corrosion tape on the basis of the development of a new type of anti-freeze tape. The substrate is a high and low density polyethylene film, while the adhesive layer is a high viscosity thermoplastic modified butyl sticker anticorrosive adhesive. The utility model can be widely applied to the external anticorrosion and repair work of oil and gas, chemical industry, urban construction, water supply, drainage, oil and gas, gas pipeline and steel storage tank. It is a pollution-free, pollution-free new environmentally friendly materials, has the following advantages:
1, strong viscosity, can be achieved from the melt, waterproof, breathable, good sealing.
2, high electrical insulation, excellent anti-aging, anti-ultraviolet strong.
3, with resistance to soil stress damage ability, impact resistance.
4, single-layer tape winding can be achieved SY / T0414-2007 standard requirements in general or enhanced anti-corrosion. The utility model has the advantages that the traditional tape needs to be wound in a plurality of layers, and the influence of the human factors on the quality of the corrosion is reduced and the construction cost is reduced.
5, construction is simple, fast, no curing time, manual, mechanical operation can shorten the construction period.
6, low cost, no pollution, waste three.
The POLYKEN 980 Cold Applied Tape for pipeline coating is suitable to any diameters for petroleum, natural gas, water supply, city gas, oil and electric power industries etc. the systems are inner wrap tape and outer wrap tape, primer and Putty.
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Backing : Special blend of stabilized polyethylene
Adhesive : Butyl rubber and Adhesion Promoting Resins
Backing of PE film
9 mils(0.229 mm)
Butyl Rubber Adhesive
6 mils(0.152 mm)
Peel Adhesion to Primed Steel
Water Vapor Transmission Rate
ASTM E 96
Water absorption after 1 day,At+23℃
ASTM D 257
2.0 x 1015 ohm.cm
2.5 x 1015 ohm.cm
2.5 x 1015 ohm.cm
Eg.: POLYKEN980-20 BLK 6"×400'
Product Model No.
Standard ordering options
Total tape thickness in mils
Tape backing color
Tape width in inches
Tape roll length in feet
We're Here to Help
Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd
Add:Jiaxiang Industry Park,jining,shandong
Contact: Mr.Jecky Li
Tel: +86-537-6400111 Fex: +86-537-6400222