If you are looking for China golden supplier and China good supplier cold applied black pe pipe tape, good quality and high quality cold applied black pe pipe tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.
Butyl rubber waterproof tape to butyl rubber as the main raw material, and other additives, the choice of high-quality special polymer materials (import), self-adhesive waterproof sealant, the environmental protection special production process solvent-free, never curing, Strong adhesion to various materials on the surface, excellent water resistance and hydrophobicity, weatherability, anti-aging, sticky surface sealing, damping and protection. Because it is completely no solvent, so it does not shrink, do not release toxic gases; because of its life is not cured, so the surface of the adhesive thermal expansion and cold shrinkage and mechanical deformation of a good follow-up, is an advanced waterproof material
The cold applied black pe pipe tape/ POLYKEN 980,955 Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine
POLYKEN 1019,1027, Liquid Adhesives can be used as primers for this system.In addition to serving as primers, these liquidadhesives themselves represent an anticorrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe. They are designed for machine or brush application and formulated with stress-corrosion cracking inhibitors. The Anti-Corrosion layer POLYKEN 980 is engineered to assure a high bond to the primed surface with excellent conformability characteristics. The mechanical protection layer POLYKEN 955,achieves a complete bond to the POLYKEN 980 inner layer, providing maximum handling and in-service protection for the coating system. The adhesives in these and all POLYKEN tape systems contain proven anti-microbial additives.The POLYKEN 980/955 can also be used for ductile iron pipes, in this case the use of 1027 primer is recommended.
-Resistant to soil stress
- Excellent adhesion to pipe and self
-Low cathodic protection
-Long-term in-ground performance
- Serve for low-high temperatures
- Cold applied
-Uniform coating thickness
-Compatible with all pipe diameters and generic plant
-Qualified ASTM D1000,AWWA C 214,EN 12068 standards
Backing : Special blend of stabilized polyethylene
Adhesive : Butyl rubber and Adhesion Promoting Resins
Backing of PE film
9 mils(0.229 mm)
Butyl Rubber Adhesive
6 mils(0.152 mm)
Peel Adhesion to Primed Steel
Water Vapor Transmission Rate
ASTM E 96
Water absorption after 1 day,At+23℃
ASTM D 257
2.0 x 1015 ohm.cm
2.5 x 1015 ohm.cm
2.5 x 1015 ohm.cm
POLYKEN 980 and 955 tape coatings are in roll form.
Eg.: POLYKEN980-20 BLK 6"×400'
Product Model No.
Standard ordering options
Total tape thickness in mils
Tape backing color
Tape width in inches
Tape roll length in feet
We're Here to Help
Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd
Add:Jiaxiang Industry Park,jining,shandong
Contact: Mr.Jecky Li
Tel: +86-537-6400111 Fex: +86-537-6400222